Diamond Systems

PC/104 16-Bit Analog I/O Module with Autocalibration

• 16 analog inputs, 16-bit resolution
• 100KHz max sampling rate
• Programmable gain and range
• FIFO support and interrupt-based A/D data transfer with Full flag and Underflow flag for better monitoring
• 4 12-bit analog outputs
• 16 digital I/O lines with choice of 8 in + 8 out, 16 out, or 16 in
• 5V/3.3V logic level operation
• Rugged -40°C to +85°C operation
• Drop-in upgrade for Diamond MM-16-AT

Managed 14-Port Gigabit Ethernet Switch with wide voltage input and serial management port

• 12 Gigabit Ethernet ports with non-blocking wire-speed performance
• 1 1G SFP socket; 1 2.5G SFP socket
• Built-in 416MHz MIPS 24KEC microcontroller for configuration and management
• RS-232 serial port provides out-of-band management interface
• Can operate autonomously or in conjunction with a host SBC
• 8K MAC addresses and 4K VLANs (IEEE 802.1Q), as well as 8K IPv4 and IPv6 multicast group support
• Jumbo frame support at all speeds
• Dual leaky bucket policers with remarking and statistics
• Flexible link aggregation support based on Layer-2 through Layer-4 information (IEEE 802.3ad)
• Multicast and broadcast storm control, as well as flooding control
• Rapid Spanning Tree protocol (RSTP) and MSTP
• 8 priorities and 8 QoS queues per port with scheduling
• Shaping/policing per queue and per port
• Multiple protocol support: IEEE 802.1d, IEEE 802.1w, IEEE 802.1s, and IEEE 802.1X
• Wide input voltage range: +5-40VDC
• Latching connectors for improved ruggedness
• COM Express form factor module (95 x 125mm)
• Extremely rugged -40ºC to +85ºC operating temperature

Managed 8-Port Gigabit Ethernet Switch with wide voltage input and serial management port

• 8 Gigabit Ethernet ports with non-blocking wire-speed performance
• Built-in 416MHz MIPS 24KEC microcontroller for configuration and management
• RS-232 serial port provides out-of-band management interface
• Can operate autonomously or in conjunction with a host SBC
• 8K MAC addresses and 4K VLANs (IEEE 802.1Q), as well as 8K IPv4 and IPv6 multicast group support
• Jumbo frame support at all speeds
• Dual leaky bucket policers with remarking and statistics
• Flexible link aggregation support based on Layer-2 through Layer-4 information (IEEE 802.3ad)
• Multicast and broadcast storm control, as well as flooding control
• Rapid Spanning Tree protocol (RSTP) and MSTP
• 8 priorities and 8 QoS queues per port with scheduling
• Shaping/policing per queue and per port
• Multiple protocol support: IEEE 802.1d, IEEE 802.1w, IEEE 802.1s, and IEEE 802.1X
• Wide input voltage range: +5-36VDC
• Latching connectors for improved ruggedness
• PC/104 form factor module (90 x 96mm)
• Extremely rugged -40ºC to +85ºC operating temperature

Managed 26-Port Gigabit Ethernet Switch with wide voltage input and serial management port

• 16 or 24 Gigabit Ethernet ports with non-blocking wire-speed performance
• 1G SFP socket; 1 2.5G SFP socket
• Built-in microcontroller for configuration and management
• RS-232 serial port provides out-of-band management interface
• Can operate autonomously or in conjunction with a host SBC
• 8K MAC addresses and 4K VLANs (IEEE 802.1Q), as well as 8K IPv4 and IPv6 multicast group support
• Jumbo frame support at all speeds
• Dual leaky bucket policers with remarking and statistics
• Flexible link aggregation support based on Layer-2 through Layer-4 information (IEEE 802.3ad)
• Multicast and broadcast storm control, as well as flooding control
• Rapid Spanning Tree protocol (RSTP) and MSTP
• 8 priorities and 8 QoS queues per port with scheduling
• Shaping/policing per queue and per port
• Multiple protocol support: IEEE 802.1d, IEEE 802.1w, IEEE 802.1s, and IEEE 802.1X
• Wide input voltage range: +5-34VDC
• Latching connectors for improved ruggedness
• PC/104 form factor module 55″ x 3.775″ (90mm x 96mm)
• Extremely rugged -40ºC to +85ºC operating temperature

1GHz Vortex86DX3 CPU with On-board Data Acquisition

• Vortex86DX3 SoC dual core CPU running at 1GHz
• Up to 2GB of DDR3 SDRAM soldered on board
• 3 or 6 USB 2.0 ports (model dependent)
• 2 RS-232/422/485 serial ports & 2 RS-232 ports
• 1 10/100Mbps Ethernet port
• 1 Gigabit Ethernet port
• 1 SATA port for disk-on-module or external drive
• 1 mSATA socket shared with PCIe MiniCard
• 24-bit dual channel LVDS LCD display
• VGA CRT
• HD audio
• PCIe MiniCard socket shared with mSATA
• 16 16-bit analog inputs
• 100KHz maximum sample rate
• 4 16-bit analog outputs
• Up to 27 digital I/O lines with programmable direction
• 8 counter/timers
• 4 pulse width modulators
• PC/104 stackable I/O expansion capability
• PC/104 extended form factor (4.0″ x 4.0″)
• -40ºC to +85ºC operation

C-based Software Toolkit for Data Acquisition Circuits

• Multi-board operation
• Consistent API
• Auto-calibration
• User interrupts
• Extensive programming examples
• Counter/timer & watchdog support

PCIe MiniCard Data Acquisition I/O Expansion Module

• 8 single ended / 4 differential 16-bit analog inputs
• 100KHz maximum aggregate sample rate
• 2048 sample A/D FIFO with programmable threshold
• 4 analog input ranges
• 4 16-bit analog outputs
• 2 analog output ranges
• 14 digital I/O lines, configurable as PWM or counters:
  • 4 24-bit pulse width modulators
  • 8 32-bit counter/timers
• +3.3VDC input power
• Latching connectors for increased ruggedness
• Support for Windows 7, XP, and Linux 3.2.x
• Universal Driver support for all functions
• PCIe MiniCard full size form factor (50.95 x 30mm)
• Operating temperature of -40°C to +85°C

click for a larger image

Integrated Autocalibrating Data Acquisition, and DC/DC Power Supply

• 3-in-1 design (CPU + DAQ + PS) reduces size
• and cost, increases ruggedness and reliability
• Atom 1.6GHz E680T CPU
• (1.3GHz and 600MHz special order options)
• 1GB or 2GB SDRAM soldered on-board
• PC/104-Plus (ISA + PCI) stackthrough expansion
• Support for:five USB 2.0 ports; 1 USB 2.0 device port,two RS-232/422/485 ports; four RS-232 ports,two Gigabit Ethernet; one CANbus port, SATA port for hard drive or solid state flashdisk, SATA disk module, LVDS LCD display and VGA, 40 digital programmable I/O line, mSATA flashdisk mounting location, PCIe MiniCard and GPS receiver sockets, +7 to +40VDC wide voltage power input
• Optional data acquisition circuitry featuring: multiplexed 32 channel 16-bit A/D with autocalibration, 250KHz maximum sample rate, four 12-bit D/A channels, four pulse width modulators, Watchdog timer, Autocalibration with Universal Driver software support
• Extremely rugged with soldered RAM and -40°C to +85°C (-40°F to +185°F) operating temperature

Compact Form Factor I/O Baseboard forwith installed ARM Computer-on-Modules

• Supports Tordadex Apalis ARM COMs:
• NVIDIA Tegra T30 1.4GHz quad core Cortex A9
• MX6 NXP/Freescale 1GHz/800MHz Cortex A9
• NVIDIA Tegra TK1 quad core up to 2.2GHz Cortex A15
• 3-4 USB 2.0 ports depending on ARM module
• 2 RS-232/422/485 serial ports
• 2 RS-232 ports
• 1 Gigabit Ethernet port
• VGA, HDMI and dual channel LVDS
• HD audio
• 4 12-bit A/D; 4 PWM
• 8 digital I/O
• I2C, SPI
• PCIe MiniCard socket
• Compact size: 4.0″ x 4.0″
• -40ºC to +85ºC operation capable

3.5 Inch Form Factor I/O Baseboard with installed ARM Computer-on-Modules

• Supports Tordadex Apalis ARM COMs:
• NVIDIA Tegra T30 1.4GHz quad core Cortex A9
• MX6 NXP/Freescale 1GHz/800MHz Cortex A9
• NVIDIA Tegra TK1 quad core up to 2.2GHz Cortex A15
• 5-6 USB 2.0 Ports depending on ARM module
• 8 RS-232/422/485 serial ports
• 2 Gigabit Ethernet ports
• VGA, HDMI and dual channel LVDS
• HD audio
• 4 12-bit A/D; 4 PWM
• 4 opto digital in; 4 opto digital out
• 16 digital I/O
• I2C, SPI
• PCIe MiniCard socket
• “Type specific” I/O connector for custom daughterboard
• Wide input 9VDC to 36VDC power supply
• 5″ form factor: 4.0″ x 5.75″
• -40ºC to +85ºC operation capable
• Highly configurable to satisfy customer feature requirements and cost targets

The Best PC/104 Bay Trail SBC in the World

• 91GHz Intel quad core E3845 or 1.46GHz dual core E3826 Bay Trail CPU
• 2GB or 4GB 64-bit DDR3 SDRAM soldered on board
• I/O Support: 3 USB 2.0 ports, 1 USB 3.0 port, 4 RS-232/422/485 ports with programmable protocol and line termination, 2 10/100/1000Mbps Ethernet ports, 1 SATA port for disk-on-module or external drive, 24-bit LVDS LCD display and VGA CRT, DisplayPort or HDMI with dual independent display, HD audio, Shared expansion socket auto-selects for either PCIe MiniCard or mSATA flashdisk modules
• Data Acquisition: 16 16-bit analog inputs, 250KHz max sample rate, 4 16-bit analog outputs with waveform generator, 22 digital I/O lines with programmable direction, 8 counter/timers, 4 PWMs
• PC/104-Plus and PCIe MiniCard expansion capability
• PC/104-Plus extended form factor (4.5” x 4.0”)
• Extremely rugged with soldered RAM and -40°C to +85°C (-40°F to +185°F) operating temperature

Embedded Systems and Ethernet Switches

• Self-contained embedded application server in rugged enclosure
• 1GHz Intel Core i7-3612QE quad core
• 7GHz Intel Core i7-3517UE, or
• 4GHz Intel Celeron 827E CPU
• Up to 16GB DDR3 SDRAM on-board
• I/O connectors for a wide range of interfaces:
  • 2 or 4 Gigabit Ethernet ports
  • 4 USB 2.0 ports
  • Up to 2 RS-232 serial ports
  • Up to 8 RS-232/422/485 serial ports
  • VGA display

• Intel “Skylake” 6th Gen Core i7-6600U 2.6GHz
• 4GB DDR4 RAM soldered on board
• Expansion socket for up to 16GB additional
• 2x Gigabit Ethernet
• 2x SATA 3.0 ports + mSATA socket
• VGA, HDMI & dual channel LVDS with 3 simultaneous independent display support
• 4x RS-232/422/485 ports
• 6x USB 2.0 ports
• 4x USB 3.0 ports
• HD audio

click for a larger image

Hercules introduces a new level of integration in EBX format CPU boards. Combining processor, data acquisition, and power supply onto one board results in a thinner, lighter, more rugged, and easier to assemble embedded system. This 3-in-1 design addresses the needs of mobile and vehicle applications by offering the benefits of reduced size, weight, cost, and power consumption. The Hercules CPU design is based on the VIA Eden processor chipset, featuring Pentium III class performance with dramatically reduced power consumption. For example 550MHz board consumes only 12 watts max and requires only a small heat sink with no fan to operate at temperatures up to 85oC. The 750MHz version consumes 16 watts and uses a small cooling fan. The advanced data acquisition circuit features auto-calibration and fully jumper-less configuration feature for maximum accuracy and reliable performance. The built-in DC/DC power supple.

Athena III SBC, 1GHz Atom E640T CPU,  1GHz Intel Atom E640T CPU offers an excellent balance of performance, power consumption and price, making Athena III an ideal choice for a wide variety of embedded computing applications.

Athena III SBC, 1GHz Atom E640T CPU, 1GB RAM, full data acquisition circuit into a single board, offering the most functionality available in a small, compact form factor.