JAI AT-200GE – 3 CCD

Description

The AT-200GE is a digital 3CCD progressive scan RGB color camera. It employs three 1/1.8-inch 1624 (h) x 1236 (v), 2 Megapixel CCDs and runs at 15.45 frames per second in full resolution mode. The AT-200GE has a GigE Vision interface and its output can be either 24-bit or 32-bit RGB. JAI developed a new 1/1.8-inch compact F4.0 prism optical system and in combination with a linear color matrix, the AT-200GE provides a higher fidelity of color reproduction. The AT-200GE also incorporates a dynamic shading circuit, gamma correction circuit and knee correction circuit to provide high picture quality. Functions like AOI and vertical binning allow higher frame rates.

FEATURES
– 3 x 1/1.8” CCD progressive scan RGB color camera for vision applications
– 1624(h) x 1236 (v) effective pixels (4.40 μm square) for each CCD
– Compact RGB prism for C-mount lenses
– Chromatic shading reduction permits wider choice of lenses
– 15.4 frames per second with full resolution
– Variable partial scan also available
– Vertical and horizontal binning for higher sensitivity and frame rate
– 24-bit or 30-bit RGB output via GigE Vision Streaming Protocol
– Linear matrix circuit with manual control or sRGB or Adobe RGB pre-sets
– Look-up Table with 1024 10-bit values
– Multiple trigger modes including timed, trigger width, trigger controlled, and sequential
– Programmable exposure from 1/15 to 1/19267 (51.9 μs)
– Individually programmable shutter/exposure for R, G, and B
– Manual, continuous, and one-push auto white balance
– Programmable GPIO with opto-isolated inputs and outputs