Description
The FLIR A615 is a series of compact and affordable thermal imaging cameras, fully controlled by a PC. Due to their compliance to standards, A615 are Plug&Play with third-party Machine Vision software like National instruments, Cognex, Matrox, MVtec and Stemmer Imaging.
Camera specific
| Imaging & Optical Data | FLIR A615 | |
| Field of view (FOV) / Minimum focus distance | 15°: 15° × 11° (19° diagonal) / 0.50 m (1.64 ft.) 25°: 25° × 19° (31° diagonal) / 0.25 m (0.82 ft.) 45°: 45° × 34° (55° diagonal) / 0.15 m (0.49 ft.) 7°: 7° × 5.3° (8.7° diagonally) / 2.0 m (6.6 ft.) 80°: 80° × 64.4° (92.8° diagonal) / 65 mm (2.6 in.) | |
| Spatial resolution (IFOV) | 15°: 0.41 mrad 25°: 0.68 mrad 45°: 1.23 mrad 7°: 0.19 mrad 80°: 2.62 mrad | |
| Focal length | 15°: 41.3 mm (1.63 in.) 25°: 24.6 mm (0.97 in.) 45°: 13.1 mm (0.52 in.) 7°: 88.9 mm (3.5 in.) 80°: 6.5 mm (0.26 in.) | |
| F-number | 1.0 | |
| Image frequency | 50 Hz (100/200 Hz with windowing) | |
| Detector data | ||
| Focal Plane Array (FPA) / Spectral range | Uncooled microbolometer / 7.5–14 μm | |
| IR resolution | 640 × 480 pixels | |
| Detector pitch | 17 μm | |
| Detector time constant | Typical 8 ms | |
| Measurement | ||
| Object temperature range | -20 to +150°C +100 to +650°C +300 to +2000°C | |
| USB | ||
| USB | Control and image | |
| USB, standard | USB 2 HS | |
| USB, connector type | USB Mini-B | |
| USB, communication | TCP/IP socket-based FLIR proprietary | |
| USB, image streaming | 16-bit 640 × 480 pixels at 25 Hz – Signal linear – Temperature linear – Radiometric |
|
| USB, protocols | TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP | |
| Ethernet | ||
| Ethernet, image streaming | 16-bit 640 × 480 pixels at 50 Hz 16-bit 640 × 240 pixels at 100 Hz 16-bit 640 × 120 pixels at 200 Hz – Signal linear – Temperature linear – Radiometric GigE Vision and GenICam compatible |
|
| Imaging & Optical Data | |
| Lens identification | Automatic |
| Thermal sensitivity/NETD | < 0.05°C @ +30°C (86°F) / 50 mK |
| Focus | Automatic or manual (built in motor) |
| Measurement | |
| Accuracy | ±2°C or ±2% of reading |
| Measurement analysis | |
| Atmospheric transmission correction | Automatic, based on inputs for distance, atmospheric temperature and relative humidity |
| Optics transmission correction | Automatic, based on signals from internal sensors |
| Emissivity correction | Variable from 0.01 to 1.0 |
| Reflected apparent temperature correction | Automatic, based on input of reflected temperature |
| External optics/windows correction | Automatic, based on input of optics/window transmission and temperature |
| Measurement corrections | Global object parameters |
| Ethernet | |
| Ethernet | Control and image |
| Ethernet, standard | IEEE 802.3 |
| Ethernet, connector type | RJ-45 |
| Ethernet, type | Gigabit Ethernet |
| Ethernet, communication | TCP/IP socket-based FLIR proprietary and GenICam protocol |
| Ethernet, protocols | TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP |
| Digital input/output | |
| Digital input | 2 opto-isolated, 10–30 VDC |
| Digital output, purpose | Output to ext. device (programmatically set) |
| Digital output | 2 opto-isolated, 10–30 VDC, max 100 mA |
| Digital I/O, isolation voltage | 500 VRMS |
| Digital I/O, supply voltage | 12/24 VDC, max 200 mA |
| Digital I/O, connector type | 6-pole jackable screw terminal |
| Digital input, purpose | Image tag (start, stop, general), Image flow ctrl. (Stream on/off), Input ext. device (programmatically read) |
| Power system | |
| External power operation | 12/24 VDC, 24 W absolute max |
| External power, connector type | 2-pole jackable screw terminal |
| Voltage | Allowed range 10–30 VDC |
| Environmental data | |
| Storage temperature range | –40°C to +70°C (-40 to 158°F) |
| Humidity (operating and storage) | IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (77 to 104°F) |
| EMC | • EN 61000-6-2:2001 (Immunity) • EN 61000-6-3:2001 (Emission) • FCC 47 CFR Part 15 Class B (Emission) |
| Vibration | 2 g (IEC 60068-2-6) |
| Physical data | |
| Housing material | Aluminium |
| Scope of delivery | |
| Hard transport case or cardboard box, Thermal imaging camera with lens, Utility CD-ROM, Calibration certificate, Ethernet™ cable, USB cable (FLIR A615), Mains cable, Power cable (pig-tailed), Power supply, Printed Getting Started Guide, Printed Important Information Guide, User documentation CD-ROM, Warranty extension card or Registration card, 6-pole screw terminal (mounted on camera) | |
Reviews
There are no reviews yet!