1 888 509 8455 | clientservice@integrys.com

EIZO Condor 2100 XMC Series Rugged XMC Video Capture and Graphics Solutions for Embedded System Applications

0 out of 5
  • 512 MB frame buffer
  • XMC form factor
  • 2D/3D graphics (OpenGL)
  • Two Video Outputs (DVI/HDMI, VGA, TV, RS-170, RS-343, STANAG, RGB, Mini DisplayPort)
  • LVDS Output (rear)
  • Two Video Inputs (TV, VGA, DVI [Single-Link], RGB, RS-170, RS-343, STANAG, HDMI/DVI, HD-SDI, SD-SDI)
  • STANAG 3350B/C support
  • Sync-on-green support
  • Resolutions up to 1920 × 1200


Request a Quote


Form Factor Compatibility

Take command over a wide range of mission-critical applications with the flexibility and integrated system compatibility of Condor XMC graphics and video capture products. The Condor 2100 XMC Series delivers high performance graphics solutions with the form factors and features required in defense, industry, avionics, and surveillance applications by providing video capture, display and overlay capabilities for these embedded system environments. The Condor 2100 XMC Series is designed for use with VME, VPX, cPCI (DELETE AdvancedTCA) and other single board computers (SBCs) using an XMC mezzanine card interface. The card has a PCI Express x8 interface consistent with the majority of the SBCs that support this bus width. EIZO Condor 2100 XMC Series

High Performance Graphics

Based on the E4690 GPU from AMD, the Condor 2100 XMC Series boasts the latest graphics features and includes hardware acceleration of H.264 and VC-1 HD video as well as MPEG-2, enabling multiple HD video streams while freeing the CPU for other tasks.

Multiple Video Inputs and Outputs

The Condor 2100 XMC Series supports two digital (DVI/HDMI/Mini DisplayPort) and analog (VGA/RS-170/RS-343/RGB) video outputs available through the rear Pn4 (PMC) connector or the front panel when selected. It can also be configured to enable TV/RS-170, LVDS or STANAG output.

The Condor 2100 XMC Series has two video inputs (through the Pn4 connector or the front panel when selected) and can support various video input formats including TV(NTSC, PAL, SECAM), DVI/HDMI, HD-SDI, SD-SDI, RS-170, RS-343, RGB, and STANAG. The two input streams are displayed on either of the two outputs and can be positioned or sized (zoom/pan capability) under software control. Individual video captured frames are available to applications for processing and compression. All decoding, scaling, video combining and format conversions are done in the GPU with minimal CPU impact. EIZO Condor 2100 XMC Series

Standard and Customized Graphics Solutions

In military and industrial embedded systems, existing COTS products often do not meet all of the requirements of a specific program. This forces system integrators to spend valuable engineering resources adapting a graphics solution to meet customer-specific requirements. EIZO Rugged Solutions’ core competency is computer graphics hardware design. Condor products can be tailored to meet any customer video output requirement. The Condor 2100 XMC Series currently supports Windows or Linux on Intel/AMD platform. PowerPC platform support as well as RTOS (real time operating system) drivers can be made upon request.

Long Product Availability

EIZO Rugged Solutions guarantees the Condor 2100 XMC Series will have a production life of at least seven years and optional support for ten years or more. This is made possible by the close relationship cultivated between EIZO Rugged Solutions and AMD’s embedded graphics group. For system integrators and customers, this means significant savings on development costs by reducing the frequency of configuration re-testing that is necessary on long term programs when replacing old cards with new ones.

Long-Term Customer Care

Just as important as the initial hardware investment is the promise and delivery of personalized attention in long-term, high-quality, customer care. EIZO Rugged Solutions is unrivaled in after-sales support offering full customer care solutions in technical troubleshooting, general queries, software updates, and service.

Condor 2101x Block Diagram



Graphics Processor ATI E4690 GPU supporting OpenGL 3.0 and DirectX 10.1w/ Native PCI Express interface (1.0a, 1.1 and 2.0 compliant)

XMC form factor, 8 Lane PCI Express Interface

Graphics Memory 512MB GDDR3 memory
Maximum Video Resolution 1920 × 1200 (DVI or Analog)
Resolutions 2 channels of up to 1080p30 or 1080i60 for HD, or 4 channels of 480i/576i for SD
2 Independent Video Outputs
(Factory Configurable. Not all combinations are available. See Product List for variants)
Output 1 (Pick One) : VGA, DVI, STANAG 3350B/C, RS-343, Mini DisplayPort
Output 2 (Pick One) : VGA, DVI, TV,  STANAG 3350B/C, RS-343 or RS-170, Mini DisplayPort
Note : If mini DisplayPort is picked, both outputs must be Mini DisplayPort and are on the front panel. Adapters can convert Mini DisplayPort to DVI or VGA.
2 Independent Video Inputs
(Factory Configurable. Not all combinations are available. See Product List for variants)
RTP/RTSP/UDP across PCIe to host machine (VC100x)
Uncompressed / Raw data across PCIe to host machine (VC102x)
RTP/RTSP/UDP through onboard Ethernet (VC102x)
Power Rating Less than 30 watts (can be configured to be as low as 15 watts)
Operating Temperature 0°C to 55°C (Standard)
-40°C to 70°C (Rugged Convection Cooled)
-40°C to 85°C (Rugged Conduction Cooled)
Vibration (sine) 0.04 g2/Hz (15-2K Hz) (Standard)
0.1 g2/Hz (15-2K Hz) (Rugged)
Vibration (random) 20g peak, 11 ms half-sine (standard)
40g peak, 11 ms half-sine (rugged)
Shock 20g peak (Standard), 40g peak (Rugged)
Conformal coating Available
Humidity 95% without condensation
Dimensions (L × W) and Weight 149 × 74 mm (convection, front IO), 5.1 oz – 5.6 oz
143.75 × 74 mm (conduction); 5.1 oz – 6.0 oz
Software/Platform Support Windows or Linux (OpenGL)
RTOS support –VxWorks & Integrity (others as needed) x86 (now)
PowerPC (future)
Product Customizations IO configurations, video formats, rear/front IO, software support. Contact Us


Military/Avionics/Industrial EIZO Condor 2100 XMC Series
ISR (Intelligence, Surveillance, Reconnaissance)
UAV (Unmanned Aerieal Vehicles)
Embedded Systems


Windows/Linux based Single Board Computers
Other Platforms, as required

EIZO Condor 2100 XMC Series
Download Data Sheet
Delivery and Returns Content description.

Contact Integrys


5805 Kennedy Road
Mississauga, ON L4Z 2G3


Local Phone: 905-502-2070
Toll Free: 888-509-8455
Local Fax: 905-890-1959
Toll Free Fax: 888-509-8456



About Integrys

For more than 50 years, Integrys has been the industry leader in selecting and evaluating new embedded, high-availability computer, imaging and video technology and engineering solutions for demanding markets and applications. The Integrys “seal of approval” is your assurance of proven value. These solutions include not only COTS products, but associated support and engineering services of value to our customers.

Integrys Location